programming Bus Pirate 3.5b for XSVF player (CPLD JTAG programmer)   Dec. 20 JPB
---------------------------------------------------------------------------------
See also:  http://dangerousprototypes.com/docs/Bus_Pirate_JTAG_XSVF_player


Using "ds30 Loader" on COM18, Baudrate 115200

Basic/Hex-file:

C:\Documents and Settings\John\My Documents\Downloads\BPv3.XSVFplayer.v1.1\BusPirate-firmware\bpv3-xsvf-vb.hex

connect Bus Pirate USB, with jumper on Bus Pirate ICSP pins PGC/PGD

Initiating download...
      Searching for bl . 
      Found PIC24FJ64GA002 fw ver. 1.0.2
      Waiting for bootloader to be ready...ok
      Writing flash...ok
      Download finished
      Tx 65.2kB / Rx 382 bytes / 12.3s

-----------------------------------------



C:\svf\BPv3.XSVFplayer.v1.1>BPXSVFPLAYER -p com18 -f c:\svf\counter3-Dec17.xsvf
-----------------------------------------------------------------------------

 BusPirate XSVF Player V.01
 http://www.dangerousprototypes.com

-----------------------------------------------------------------------------
File is 22846 bytes, read 22846 bytes Opening Bus Pirate on com18 at 115200bps,
using XSVF file c:\svf\counter3-Dec17.xsvf
 Entering XSVF Player Mode
 Waiting for first data request...ok
Sending 4096 Bytes (1000)...ok
Sending 4096 Bytes (2000)...ok
Sending 4096 Bytes (3000)...ok
Sending 4096 Bytes (4000)...ok
Sending 4096 Bytes (5000)...ok
Sending 2366 Bytes (593E)...ok
End of operation reply 00
  Success!
 Thank you for Playing! :-)


-----------------------------------------------------------------------------